NEW COMPLETE HUSQVARNA FACTORY ISSUED WORKSHOP MANUAL ON CD FOR ALL THE MODELS OF HUSQVARNA MOTORCYCLES PRODUCED FROM 1975-1981.
THIS WORKSHOP CD IS FROM THE ORIGINAL HUSQVARNA FACTORY ISSUED WORKSHOP MANUAL AND COVERS EVERYTHING FROM ENGINE REBUILDING, SHOCKS AND FORKS, LACING WHEELS, TOOLS, FRAME, TRANSMISSION, ELECTRICAL, ETC...TOO MUCH TO LIST.
10 SECTIONS IN ALL WITH DETAILED PICTURES AND EXPLODED VIEWS SHOWING YOU HOW TO MAINTAIN AND REPAIR YOUR HUSQVARNA. THIS IS A MUST HAVE ITEM WHEN WORKING ON YOUR HUSQVARNA.
IMPORTANT NOTE:
For the 1979-1981 MM/MN models, the work shop manual covers the following sections:
Engine
Transmission
Clutch
Ignition
Fuel & Carburetor
Front forks
Wheels and brakes
Even though the workshop manual does not mention the MM/MN Frames, the information contained is correct and applies to the MM/MN Models.
It does not contain Technical information for the MM/MN Models or any Frame and Rear suspension items, 2 sections out of ten.
Husqvarna never up-dated this manual to reflect the MM/MN Models and must have felt no need to. This is the last complete workshop manual Husqvarna released and made available.
Husqvarna never released another complete work shop manual after 1977. For the 1980-1986 Husqvarna's, the factory issued only engine manuals, owners manuals and a single sheet technical data card for your particular model given to you at the point of purchase.
